yalotrp

Chapter 1

Getting started

What the board does for you, picking a scenario, loading your deck, and saving.

What the board does

The play board runs a game of The Lord of the Rings: The Card Game in your browser. It keeps the encounter deck, the staging area, the active location, the enemies engaged with you, shadow cards and the quest. In PvE mode it also keeps your heroes, hand, deck and discard pile.

It handles the bookkeeping, and the decisions stay with you. In short:

  • Done for you: shuffling and dealing, a resource on each hero and a card drawn each round, readying cards and raising threat in the Refresh phase, adding up willpower and threat, putting progress on the location and the quest, discarding shadow cards after combat, and many cards' own effects (see "Card effects" below).
  • Yours to do: every choice. You press the buttons that reveal encounter cards, run the engagement checks, deal shadow cards, resolve the quest and advance it. Playing a card from your hand opens a window to pay its cost from your heroes (Gameplay settings, Pay for cards played). Nothing is destroyed by itself, and with one player nobody loses by itself: the board offers the button, and you press it.

Picking a scenario

Open Play. Scenarios are grouped by cycle in folded panels; type in the search box to find one by name. Click a scenario to open its board.

The start window

When you open a scenario with no saved game, a window asks how to play it:

  • Mode: PvE is the full game: your deck on the board against the encounter deck. Encounter runs only the encounter side, while you play your own cards on your real table.
  • Players: 1 to 4. In PvE, more than one player is multihanded play: you play every player's deck yourself, switching between them (see below). In Encounter mode the number is used by cards that count players.
  • Difficulty: Easy, Normal or Nightmare, when the scenario has more than one version. A few scenarios have printed modes of their own (Easy, Standard, Hard) instead.
  • Campaign mode: Yes, Expert or No, when the scenario is part of a campaign. With Yes or Expert you name the campaign, or continue one. See Campaign mode.

Then press Start. You can change what the window starts with under Account → Gameplay settings → New game defaults. That is also where you choose Setup: Automatic carries out the quest's Setup text and reminds you of anything it cannot do, Manual does no setup (you place the cards yourself), and Experimental, the default, is Automatic plus setups for some heroes and player cards that are still being tested.

Loading your deck

In PvE mode, Start asks for your deck. Paste a link to a RingsDB decklist, or the deck's text as RingsDB exports it, and press Load. Tick Save decklist to keep it for next time; saved decks are in the dropdown above the box. Decks you built on the Decks page are in that dropdown too, under My decks.

If the site has no data for some cards, it names them and offers to load the rest. Skip starts with no player cards at all.

Your starting threat is the total of your heroes' threat, and six cards are dealt to your hand.

Building a deck

The Decks tab keeps decks in your browser. Press New deck, or Import a RingsDB decklist (a link, the text export, its JSON, or a file you downloaded) to change it here. Find cards with the search box and the Sphere, Type and Cost filters (on a phone the spheres are a row of symbols: tap one to hide or show it): as with card search, cards are listed once you type or change a filter, at most 200 at a time. Owned only keeps to the packs you ticked under Account → Owned. Use − and + to add cards. The deck panel shows the card count, starting threat, a cost curve, and anything that breaks the deckbuilding rules. Press Save when you're done. Copy as text gives the deck in RingsDB's text format.

Playing multihanded

With two or more players in PvE, Start asks for a deck for each player in turn. A player whose deck you Skip has no cards on the board; skip every deck but the first and you get the one-player board, with the number of players still counted by the cards that count players. Each player has their own heroes, cards in play, hand, deck, discard pile, engaged enemies and threat. The quest, staging area, active location and encounter deck are shared.

The board shows one player's cards at a time. The player badge at the start of the tracker (on a phone, in the menu) shows whose cards are on the table, P1, with the first player token beside it while that player has it. The arrows on either side, and , switch to the previous or next player. Hold the badge to list the players with their threat, heroes, hand and engaged enemies; pick one to put their cards on the table. The threat badge at the top right of the Quests zone reads P1, P2, ... and always shows the threat of the player on the table. Tap it to change that threat with − and +; the same list of players is under them, so on a phone you can switch players from there too. Hold it to switch straight to the next player. A list window of a player's own cards (hand, deck, discard pile, heroes, play area, engaged enemies) has a tab for each player, P1 · 5 P2 · 4, to look at another player's cards without switching. What you do to a card on another player's tab (play it, exhaust it, discard it) is done as that player and leaves the table as it is; drag one of their cards onto the table to give it to the player on it, or drop a card in their tab to give it to them. When a card's question or search is about another player, the game puts that player on the table and the window's title starts with them ("P2 · Resolve Forest Spider?"). Switching is not a game action (no card enters or leaves play), but it can be undone. You cannot switch while a card's question or an attack is open.

With Multihanded split (pc) switched on (Account → Gameplay settings), a two-player game on a large screen shows both players at once instead: P1 on the left half of the table, P2 on the right, each half with its own engaged enemies, heroes, play area, hand, deck, discard pile and threat. The active location sits between the two engaged rows, under the encounter deck and discard pile. Use either half as you would the one-player board: a press in a half makes that player the one on the table. To give a card to the other player, drag it into their half (onto one of their zones, or onto one of their cards to attach it). The card still belongs to the player whose deck it came from: when it is discarded, it goes to its owner's discard pile.

The round's automatic steps are done for every player in turn, starting with the first player: resources and the draw, engagement checks, dealing shadow cards, readying, the threat rise, and the end of combat. The willpower committed by every player adds up to one quest total, and a failed quest raises every player's threat. The log marks each player's lines with P1, P2 and so on, and shows only the lines of the player on the table (and the shared ones) until you pick All or another player in it. Engaging, travelling, attacking and playing cards are done for the player on the table. Every player's cards carry out their own effects, whoever is on the table; when one asks a question, that player's cards come to the table until it is answered.

The steps the players take one at a time, in turn order (the mulligan, planning, committing characters to the quest, optional engagement, enemy attacks and player attacks), get a done button beside the phase button: P1 done → P2 puts the next player's cards on the table, and the last player's, such as P2 done → End, goes on to the next step with the first player back on the table (on a phone it reads P1 → P2 and P2 → next; in the Mulligan phase it takes the place of Mulligan once that player has mulliganed). It can be undone like any move, and is greyed out while a card's question or an attack is open.

The first player token passes to the next player at the end of each round (Refresh). To give it to someone else, hold the player badge and press the token beside their name. In campaign mode, every player's heroes are recorded in the Campaign Log, and every player's deck carries on to the next scenario.

When a player's threat reaches 50, or their last hero leaves play, the board asks whether to eliminate them ("P2's threat is 50: eliminate P2?"). Yes takes every card they own out of the game (heroes, cards in play, hand, deck, discard pile, and their cards attached to other players' cards), puts their engaged enemies back in the staging area, and sends another player's cards they had to that player's discard pile. From then on the round's steps, the arrows, the player list and the tabs pass over them (they show as out), the first player token goes to the next player if they had it, and the next player's cards come to the table if theirs were on it. No keeps them in; you are not asked again until their threat has gone below 50 and back. When every player has been eliminated, the players have lost. With one player nothing is asked: the game goes on at 50 threat as before. Eliminating a player can be undone like any move.

Saving, leaving and starting over

The game saves itself after every move. When you open a scenario that has a game in progress, you are asked whether to Continue it or start a New game. Account → Saved games lists every game in progress, and a click resumes one.

  • Exit (in the tracker) offers Save (keep the game for later), Delete (delete the save and record nothing), Forfeit (delete the save and record a loss in the Game log; in a campaign it also counts as a lost try) or Mark as won (delete the save and record a win in the Game log; the Campaign Log is not changed).
  • Restart starts the scenario again with the same choices and the same deck.
  • Cards finds any player card and brings it into the game, and Settings opens Dark mode, Gameplay settings and Logic settings.

Card effects

Many encounter cards and player cards come with card logic: the board carries out their text. When an encounter card is revealed, it first asks "Resolve this card?", so you can still cancel it with a card such as A Test of Will. Cards with logic you trigger yourself show an badge at their top left: click it to use the effect. A card with no logic is played by hand like a real card.

To play entirely by hand, set Account → Gameplay settings → Automation to Manual. Card effects has the details.